Combined filter FGM C (threaded) A2P3 RD (222454)

The FGM A2P3 R D gas mask filter is distinguished by its low weight and high reliability thanks to the thermoplastic impact-resistant polymer housing. The standard threaded connection (Rd 40×1/7” (DSTU EN 148-1:2004)) provides an easy, secure, and tight attachment to the mask, preventing any incorrect installation.

The large internal volume of the gas mask filter allows for prolonged use, and its low breathing resistance makes it comfortable.

FGM C A2P3 R D gas mask filters are used together with the ST-S100 panoramic mask and are intended to protect the respiratory system from the harmful effects of organic gases and vapors with a boiling point above 65°C. The gas mask filters reliably protect against radioactive and microbiological aerosols at nuclear power plants and radiochemical facilities. These gas mask filters have been tested with dolomite dust and can be used in heavily dust-laden environments.

The filter’s housing is distinguished by its low weight and high reliability, thanks to the thermoplastic impact-resistant polymer material. The FGM housing exhibits excellent dielectric properties. The filter is easily and securely attached to the mask.

Layers of polyester material are ultrasonically welded to the fasteners. It is designed to prevent the spillage of activated carbon. The filter’s soot element is made of polyester material.

Highly efficient coconut-based impregnated charcoal from leading global manufacturers.

Anti-aerosol filter with P3 protection class up to 50 MAC (Maximum Allowable Concentration).

Each filter is hermetically sealed in polyethylene with instructions, preventing air or moisture from entering the package.

The FGS gas mask filter is used when the volumetric fraction of oxygen in the work area is at least 17%, and the origin and concentration of harmful substances in the air are known. The gas mask filter is also used in potentially non-explosive atmospheres. When using the FGM A2P3 R D against radioactive dust, it is recommended to replace the filter with each change.

A2 (brown color) — Class 2 protection against organic gases and vapors with a boiling point above 65°C.
P3 (white color) — Class 3 protection against radioactive and microbiological aerosols at nuclear power plants and radiochemical facilities.
D — The filter has been tested with dolomite dust and can be used in heavily dust-laden environments.
R — The filter is reusable.

The gas mask filter fully meets the requirements of DSTU EN 14387:2017. FGM A2P3 R D filters should only be used for protection against the harmful substances corresponding to the filter type and its color marking.

It is recommended to store the filters in their original sealed packaging in a clean place at temperatures from -20°C to +50°C and at a relative humidity of up to 80%.