Combined safety harness PLC3 000000279-P (6210579)
- Category: Fall protection gear
- Product Name: Combined safety harness PLC3 000000279-P (6210579)
Courier - the duration of delivery to any locality in Ukraine is from 1 to 3 days.
Delivery - delivery within the territory of Ukraine from 2 to 5 days.
Pickup from the office "Sever-Spetsodezhda" - delivery at the office at Zhitomir, st. Mikhailovskaya, 17.
Self-pickup from the warehouse "Sever-Overalls" - delivery at a warehouse in Zhitomir, st. Czech Kroshnya, 25a.
 |
Укрпочта — от 40 ₴ | Will be transferred to the delivery 11 September | |
 |
New Mail | Will be transferred to the delivery 12 September | |
 |
Pickup from Delivery | Will be transferred to the delivery 11 September | |
 |
Meest ПОШТА — від 30 ₴ | Will be transferred to the delivery 11 September | |
 |
Pickup from the office in Zhytomyr, Mikhailovskaya, 17 | Will be transferred to the delivery 11 September | Free |
 |
Rozetka — 30 ₴ | Will be transferred to the delivery 11 September |
"Payment via card" - Payment by card of payment systems Visa, Mastercard or Cabal.
"Payment on invoice" - Pay according to the invoice to the current account.
Combined safety belt PLC-3 with shoulder and leg straps is designed to be used as a support means to protect workers in case of a fall from a height during installation and repair work, in accordance with the "Rules for labor protection during work at height" DNAOP 0.00 -1.15-07.
When using a sling with a shock absorber to the dorsal attachment point of the PLC-3 belt, it can be used as a means of personal protection for picking up in case of a fall from a height.
When using a rescue halyard, the belt can be used as a rescue or safety belt while working in tanks, tanks, trenches, wells, etc. This model is used for safe work at height.
The design of the belt allows you to perform work using the technique of industrial mountaineering controlled descent, long-term hanging and additional climbing equipment: crawl, jumar, STOP and ID descenders.
The PLC3 belt consists of leg straps, a sash, a belt, shoulder straps provided with buckles to adjust the length, dorsal, front upper, lower and side safety knots. These nodes are designed to secure the safety elements: carabiners, slings, shock absorbers, auxiliary loops and half rings for auxiliary fastening of the working tool.
The belt is made in sizes:
S - waist circumference from 640 to 1000 mm.
M - waist circumference from 850 to 1300 mm
L - waist circumference from 1100 to 1500 mm.
Belts in sizes “L” and “S” are made to order only.
