Chain sling with shock absorber and carabiners K20 + K55 (1MSL2) 48506 (6110546)
- Category: Fall protection gear
- Product Name: Chain sling with shock absorber and carabiners K20 + K55 (1MSL2) 48506 (6110546)
- Note: Attention! The price is indicated without VAT. For legal entities, 20% of the cost of the goods will be added to the price.
Courier - the duration of delivery to any locality in Ukraine is from 1 to 3 days.
Delivery - delivery within the territory of Ukraine from 2 to 5 days.
Pickup from the office "Sever-Spetsodezhda" - delivery at the office at Zhitomir, st. Mikhailovskaya, 17.
Self-pickup from the warehouse "Sever-Overalls" - delivery at a warehouse in Zhitomir, st. Czech Kroshnya, 25a.
 |
Укрпочта — от 40 ₴ | Will be transferred to the delivery 11 September | |
 |
New Mail | Will be transferred to the delivery 12 September | |
 |
Pickup from Delivery | Will be transferred to the delivery 11 September | |
 |
Meest ПОШТА — від 30 ₴ | Will be transferred to the delivery 11 September | |
 |
Pickup from the office in Zhytomyr, Mikhailovskaya, 17 | Will be transferred to the delivery 11 September | Free |
 |
Rozetka — 30 ₴ | Will be transferred to the delivery 11 September |
"Payment via card" - Payment by card of payment systems Visa, Mastercard or Cabal.
"Payment on invoice" - Pay according to the invoice to the current account.
Material: steel chain with a protective anti-corrosion coating
Compliance with the requirements:
DSTU EN 363:2017, 354:2007, 364-2017, 365:2017
Static breaking load:
at least 10 kH
K20 carabiner opening width: 20 mm
K55 carabiner opening width: 55 mm
Length: fixed 1906 mm
Complete set: chain sling with shock absorber and carabiners K20 + K55, passport for the product
Warranty period: 12 months
The chain sling is made of steel chain with a protective anti-corrosion coating. It is used with safety belts when performing work where damage to the sling on the sharp edges of buildings is possible, as well as when performing fire work (electric welding, gas welding), where it is necessary to use a sling made of refractory material.
The shock absorber is used on slings with belts having shoulder and hip straps. Provides a reduction in dynamic loads on a person when falling from a height. The minimum mounting height of the installer is 4 meters.
The shock absorber opening start force is not less than 1960 N or 200 kgf (the shock absorber is structurally designed in such a way that when a force exceeds the start shock absorber opening force, it opens and the textile “damping absorber” breaks).
- The breaking force of a fully opened shock absorber is not less than 15 kN.
- Length in the open state (after opening the shock absorber) - 1580 ± 50 mm.
- Braking force when a load of 100 kg falls - no more than 3925 N (400 kgf).
This product is part of a fall arrest personal protective equipment and must be used in conjunction with a complete fall arrest system.
Attention! The price is indicated without VAT. For legal entities, 20% of the cost of the goods will be added to the price.
